top of page

dtec Digital Print Floor Media

direct printable white, structured REACH and RoHS compliant soft-PVC film. No lamination needed. The film is anti slippery and fulfills slip resistance standard DIN 51130 - R9 Rating. Testet without printing. Digital printable with solvent, eco solvent and Latex inks. The direct printable Floorgraphics film is for short time applications on smooth floors.

Product Structure

  • Structure
    PVC film, 100 µm, white, matt
     

  • Interliner
    One side siliconised surface-coated paper, white, 120 g/m²
     

  • Adhesive
    pure polyacrylic , semi permanent, transparent
     

  • Total Thickness
    0.12 mm
     

  • Adhesive Weight
    20 g/m²

​

Characteristics:
Average value
Test Method
Adhesion on steel:
(after 20 min.)
2.5 N / 25mm
AFERA 5001
5 N / 25mm
Adhesion on steel:
(after 24 h)
AFERA 5001
Dimensional Stability: MD
< -2 %
FTM 14
< 0 %
Dimensional Stability: CD
FTM 14
Flammability: On aluminium
self-extinguishing
DIN 75200
Application temperature:
min. 8°C
End-Use Temp range:
from 40°C to 80°C
Shelf life:
2 years (see application information)
Durability:
The estimated durability is based on accelerated ageing tests and refers to a vertical exposure under middle European climates. The durability of the product depends on the substrate’s preparation, the atmospheric conditions and the environmental influence. Exposure to extreme conditions (tropical climate, high humidity, high UV-light exposure or polluted areas) can decrease the durability in a dramatically way.

Media Gaurd Laminate       dtec [GL- 412]

High-quality, monomeric textured REACH and RoHS compliant pvc for use in a wide variety of applications particularly harsh environment floor graphics (fulfills slip resistance standard DIN 51130 - R10 Rating and for Sport floors (DIN V 18032), as well as pop-up materials. Furthermore this laminate can be used to protect UV printed medias.

Product Structure

  • Support
    PVC-film, 100 µm, transparent
     

  • Interliner
    One side siliconised surface-coated paper, white, 63 g/m²
     

  • Adhesive
    pure polyacrylic , permanent, transparent
     

  • Total Thickness
    0,12 mm
     

  • Adhesive Weight
    30 g/m²

​

Characteristics:
Average Value
Test Method
Adhesion on steel:
(after 24 h)
11 N / 25mm
AFERA 5001
< -3 %
Dimensional Stability: MD
FTM 14
Dimensional Stability: CD
< 1.5 %
FTM 14
Flammability: On aluminium
self-extinguishing
DIN 75200
Environmental Performance:
Chemical Resistance
Conditions
Appearance
24h at room temperature and 4h in propanol
no change
24h at room temperature and 48h in water
no change
Temperature resistance:
Conditions
Appearance
24h at room temperature and then 24h at 80°C
no change
24h at room temperature and then 24h at -40°C
no change
Humidity resistance:
Conditions
Appearance
24h at room temperature and then 24h at 38°C and 98% humidity
no change
Application temperature:
min. 8°C
End-Use Temperature range:
from -40°C to +80°C
Shelf life:
2 years (see application information)
Durability:
3 months floor graphic (indoor applications)
The estimated durability is based on accelerated ageing tests and refers to a vertical exposure under middle European climates. The durability of the product depends on the substrate’s preparation, the atmospheric conditions and the environmental influence. Exposure to extreme conditions (tropical climate, high humidity, high UV-light exposure or polluted areas) can decrease the durability in a dramatically way.
bottom of page